Skip navigation
Favorites
Sign up to follow your favorites on all your devices.
Sign up

NASCAR displays counterfeit part from Chase Briscoe car

qqUxGIgu81VA
Nate Ryan, Dale Jarrett and Marty Snider preview the NBC, USA and Peacock portion of the NASCAR schedule, featuring Nashville, Chicago, Indianapolis and Daytona races before the playoffs start at Darlington in September.

SONOMA, Calif. -- NASCAR displayed the counterfeit part from Chase Briscoe’s car on Saturday at Sonoma Raceway, showing how the part did not correspond to what should have been in the car.

NASCAR found the issue at its R&D Center after last month’s Coca-Cola 600. The sanctioning body fined crew chief John Klausmeier $250,000 and suspended him for six races. NASCAR also docked Briscoe and the team 120 points and 25 playoff points for the L3 infraction.

“We want to be transparent on the penalties,” said Brad Moran, managing director of the Cup Series as he displayed the counterfeit part to media.

https://youtu.be/Ic9c1qrNbCc

Moran displayed a a portion of the engine panel from Briscoe’s car. He noted the engine duct was counterfeit. He said the proper pieces are 3D printed at the R&D Center and Fiberworks Composites sells them and installs them for teams. Moran said the duct is “in the bottom of the car under the engine panel. It’s to help cool the driver. It was added prior to the first race. During testing ... we realized we wanted to get heat out of the engine compartment, and that’s what this piece does.”

Moran noted that with the counterfeit part, “we can clearly see the textures are different (from the proper part).”

He displayed what officials call a gauge that determines if the duct fits the proper parameters. He showed it fitting a proper duct and not properly fitting in the counterfeit part.

“It was a part that was made, and it was made for whatever reason,” Moran said. “It was, I guess, put on by error, but it was on the vehicle. It is a piece that should not have been made in the first place, and it was spotted at our teardown at the R&D Center.”

Moran said the issue was found in a visual inspection of the part. NASCAR inspected it further and Moran said “there are certain little characteristics that are in (a proper piece)” that officials did not see in the one on Briscoe’s car. “The more we examined it, the more we realized that’s not a part they bought.”

Moran noted that while the penalties were severe, they could have been worse based on the rulebook.

“It was the low end of the L3,” Moran said. “It’s a real big hit for any team. If it continues, and we feel we are not where we need to be, unfortunately, it’s going to ramp up. We’re not going to stop.

“The deal with this car is it needs to be run without modifying. It costs teams a lot of money in development. All the owners agreed. We all agreed where we need to be to make this a successful program, and we’re not going to give up.”